Rhino 4.0 SR8 发布更新

Jessesn

立刻下载... What's New, SR8 (1-Apr-2010)
改善项目:

• 储存文件：在选项对话框的文件页面新增是否储存 .bak 备份文件的选项。

修正项目:

• 实时在线说明现在可以在Rhino安全模式中使用。
• Dim指令：修正四舍五入进位不正确的错误。
• Bongo的显示问题：修正预览模式无法正确显示动态物件的错误。
• 拖放文件：修正当Rhino窗口部分被其它窗口遮盖时，拖放文件至Rhino窗口，Rhino窗口不会跳到最前面的问题。
• ExtractConnectedMeshFaces指令：修正Script版本的指令的"仅边框线"选项未建立边框线的错误。
• MatchSrf指令：修正选项设定不正确或为记住的错误。
• Open:DWG/DXF:
  • A crash involving importing duplicate linetypes has been fixed.
  • A problem where some objects were missing in the file has been fixed.
  • Importing a revolved solid did not work properly. This is fixed.
• 开启SolidWorks文件：Rhino 4.0 SR8已将SolidWorks文件导入程式卸载，如果您是从之前的版本升级到SR8，您仍然可以读取SolidWorks文件。SR8完整版的安装程式将没有读取SolidWorks文件的功能。
• Open:SolidWorks:
  • A crash when selecting an assembly has been fixed.
  • A problem opening read-only files (such as those downloaded from email or CD) has been fixed.
• PictureFrame指令：修正一项与透明设定有关的错误。
• PointDeviation did not properly update when control points were nudged. This is fixed.
• PolylineOnMesh指令：在Windows 2000上点选网格物件时可能会意外退出的错误。
• Section指令：修正无法建立平面物件的边框方块 (曲线) 的错误。
• SetView: Did not properly update the viewport projection when setting to perspective. This is fixed.
• Split: When splitting a surface, the resulting surfaces incorrectly did not have the same u-and v-directions as the original surface. This is fixed.

Failure Bugs Fixed:

• IncrementalSave (1)
• Installer (4)
• Localization (2)
• MoveHole (1)
• Open:DWG/DXF (4)
• Open:SKP (1)
• open:SolidWorks (2)
• RhinoScript (7)
• Save (1)

Crashes Fixed:

• CrashDump (7)
• Display: Engine (5)
• EditScript (1)
• Export (1)
• ExtrudeCrvTapered (1)
• Import (3)
• Loft (3)
• MatchSrf (1)
• Move (1)
• Offset (1)
• Open (5)
• Open:DWG (1)
• Open:FBX (1)
• Pan (1)
• RemoveEdge (1)
• Rib (1)
• RunScript (1)
• Save:OBJ (1)
• Save:STEP (1)
• Save:ZPR (1)
• SelBoundary (1)
• SetMaximizedViewport (1)
• ShowSelected (1)
• Smash (1)
• Split (3)
• Toolbar (1)
• Trim (2)
• Undo (6)
• Unweld (1)

{:4_87:}

又有更新拉，。。。。。。。。

愚人节那天就发布了。。。

{:4_95:}{:4_95:}{:4_102:}{:4_102:}··要更到什么时候···

{:4_94:}SR7都还没用咧~~~

期待一下！

还是等到正式版出来才下载~~~

{:4_95:}

噢?目前SR7中